We've grouped the applications by their starting
letter, i.e. "Furniture" appears in DEF.
DANCE PLATFORMS |
ACRYLIC is the recommended material at very high thicknesses |
DECORATIVE EFFECTS, MOBILES & ARTWORK |
Coloured including Fluorescent and Clear including bubble
effect ACRYLIC
in sheets cut to any shape, rods, tubes, bars,
triangles & 3D semi circles. Also THIN
PLASTIC SHEETS of Polypropylene in many varied
colours & finishes. Also FOAMED
PVC & POLYSTYRENE
sheets in many colours & thicknesses. |
DISPLAY
/ POSTER PHOTO MOUNTING PANELS & or BLOCKS |
Cut from Clear Acrylic.
Normally 4 to 25mm is used for the front &
2 to 8mm for the rear panel. Please
go to DISPLAY
MOUNTS page for more data. On that page you
will also read about a range of Support Mounts
that can be supplied & holes cut to fit. As photo backing we offera range of PVC Foams and more environmentally friendly alternatives. Click here for a comparison chart. |
DIVIDERS |
See THIN
PLASTIC SHEETS |
DOOR LIGHTS |
Opal or
Clear ACRYLIC
or POLYCARBONATE. |
DRY WIPE BOARDS |
Please click here. |
ENGINEERING
PROJECTS |
We are
happy to work to agreed deadlines & budgets
with you. Please E-mail
your plans. You will be delighted at our prices. |
FOOD CONTACT
- COMMERCIAL PREMISES |
POLYPROPYLENE
has FDA approval for food contact for work surfaces
& walling |
FOOD CONTACT
- NON COMMERCIAL PREMISES |
If no
approval is required uPVC
or POLYPROPYLENE
will be acceptable. FOAMED
PVC with a gloss finish is OK & cheaper
but the surface is not so impact resistant. See
also KITCHEN WALLS entry on this page. |
FRIDGE
MAGNETS |
See MAGNETIC
PVC |
FURNITURE |
ACRYLIC,
POLYSTYRENE,
FOAMED
PVC, POLYCARBONATE,
ALUPANEL.
There are too many uses to go into here so ask
us by e-mail. |
|
All data is supplied in good faith & we recommend
you take professional advice before using it as
it may not apply to your project. If there
is anything you do not understand or you need
any more help with please
email us using our contact form & we will
be delighted respond promptly. |