Acrylic panels joined by Magnets

 

 

Quote Now

Click here to request a detailed quote

  • Sizes/ Uses/ Properties
  • Technical and Other Data
  • Colour Information

These powerful little magnets are capable of being used to firmly hold 2 panels together without movement.

Sizes and Uses

Virtually any area can be joined. Be careful not to use so thick a picture media that it weakens the grip of the magnets too much. 250g/ms should be OK. Ask if unsure as we can adjust the magnet depth. Heavier panels may require more than the standard 6mm diameter 3mm deep magnets which as a default we position at 9mm centres in and down from each corner. The cost is only a few pounds per panel.

Magnets are bonded almost invisibly into accurately drilled holes in cut and edge polished panels.
The opposing panel has magnets added with opposing poles.
The panels are then checked for alignment and quality.
Here we see a small business card suspended between polished panels. There is no size limit other than "Not too thick" and if you do not want the magnets to cover the picture ensure the picture is smaller or the panels are bigger. Allow 15mm over size for the standard magnet positions
There are many combinations of colours that can be chosen. Here are some examples.
Back row left: Clear on White
Back row right: Clear over a Black back
Front row left: Clear on Clear
Front row right: Glasslike Greenedge on Glasslike Greenedge
 

 

Technical and Other Data

The technical data is shown on the Acrylic page on the Technical information tab.

Display Panels - Colours

Colours

Any colour of material can be joined by magnets.

 

 

« Back to previous page | Back to top of page ^^


PRODUCTS:
Acrylic (Perspex™) Sheet.
Acrylic Rods, Tubes & Fluorescent Colours.
Acrylic globes, domes, spheres, hemi-spheres & balls.
Acrylic blocks.
Acrylic display panels & support mounts.
Acrylic mounting blocks.
Acrylic blocks joined with magnets.
Multi wall Polycarbonate.
Foamed PVC panels.
Forex Smart & Foam X mounting sheets.
Polycarbonate sheets, rods, tubes.
Polycarbonate globes.
ABS sheets.
Aluminium Composite sheets.

PETG, APET, (Polyester) sheets.
Polyamide (Nylon) sheets & rods.  

Polyethylene (HDPE) sheets.
EcoPanels (Recycled LD Polyethylene) Low cost thick sheets.
Polypropylene sheets - over 2mm thick.
Polypropylene sheets - under 1.2mm thick.
Polystyrene (HIPS) including multi-colour thin sheets.
Polysulphone, PEI, PEEK sheets.
PVC Solid sheets. (Cladding etc) 2mm to 12mm.
PVC Low Density Rigid Foam sheets.
PVC Forex Smart & Foam X sheets.
PVC Thin Flexible sheets from 0.140mm to 2mm.
Thin Plastic sheets - Polypropylene, PVC.
UHMWPE Polyethylene 1000.
Globes, Domes, Balls, Hemi-spheres.

 

Terms of Business
Privacy Policy
Copyright © 2024 eSheet Ltd.
Registered in England & Wales, No. 8088486

www.esheet.co.uk

Tuesday 19th of March 2024